" "

    CM6200 CIRCULAR MILL

    CM6200-640x400

    CM6200-640x400

    the

    CM6200 CIRCULAR MILL

    For machining large flanges 73.5 – 199 inches (1866.9 – 5054.6 mm) in diameter, and featuring a center machine clearance designed to fit over 24 inches (609.6 mm) diameter kingpins, this Circular Mill can be configured for powerful milling, single-Point machining, and grinding operations. Extraordinary rigidity, versatility, and power are at your fingertips – this machine can handle your toughest large flange machining jobs quickly and efficiently. For smaller ranges view the FF7200 or FF8200 Flange Facers.

    Specifications:

    ID Mounting Diameters: 78.9 – 177.2 inches (2004.1 – 4500.9 mm)
    Milling Diameters: 73.5 – 199 inches (1866.9 – 5054.6 mm)
    Min Turning Arm Swing Diameter: 135.6 inches (3444.2 mm)
    Max Turning Arm Swing Diameter: 197 inches (5003.8 mm)

    Product Advantages

    POWER
    Robust 3.0 Hp Motor:
    – Produces 30% more power than similar drills.
    – Drills holes up to 1.5 inch (38.1 mm) diameter.
    – Faster spindle speed in the cut.
    – Higher metal removal rate.
    – Reliably drills through tough metals like HY80 steel.
    RELIABILITY
    High quality gear set is more robust than similar drills, fully supported by two bearings, and will last through years of heavy use. This results in longer run times and a longer life span for the drill.
    Integral clutch system – The PD3000 uses a clutch system rather than shear pins which prevents the drill from damaging itself in a stall condition, increases uptime, and extends the life of the drill.
    Dedicated chip wiper significantly reduces the amount of chips entering the gearbox which reduces downtime and keeps the drill in action.
    Innovative shut-off mechanism protects the drill from damage due to accumulated chips.
    Automatic retract system is self-cycling. Mount it, and push go! The depth collar determines the hole depth and automatically triggers a retract cycle. The drill retracts 10 times faster than the drill feed rate.
    Manual retract capability allows chip clearance.
    Compatible with common air feed drill bushings – the drill can be used with existing drill templates.
    SAFETY
    Low pressure drop-out prevents unintended re-starts after loss of supplied air pressure.
    Compact Design make set-up, transport and storage quick and easy.