" "
egytorc-services
Egytorc – Services
05/03/2019
BF-640x400
Egytorc – PB30 POWER BEVELER (Model MFT-HD)
07/03/2019
Show all

Egytorc – Service

egytorc-services

egytorc-services

Flange Facing Machines

FF6300-570x480


FLANGE FACING MACHINES - FF6300





Performance, versatility, and safety. Delivers high-torque performance to quickly re-surface flanges and repair sealing and bearing surfaces efficiently and cost-effectively. Can be configured in either ID, OD, or surface-mount configurations for a variety of machining applications, with a quick and easy changeover. Facing diameters range from 11.8 to 60 inches (299.7 to 1524.0 mm).

FF5300-1-640x400

FLANGE FACING MACHINES - FF5300

sets a new standard in compact flange facing. Easy to set-up and run with a new modular design including an interchangeable turning arm, giving users the flexibility to go out to 40 inches (1,016 mm) and still produce the desired finish. Powerful and simple to use whether you’re facing, beveling or turning valve, pipe, or pump flanges. Comes with a more compact swing diameter with a minimum clearance of 22.75 inches (577.9 mm). Facing diameters range from 5.7 to 40 inches (144.8 to 1016 mm).

FF1200-OD-Mount-FF-640x400


FLANGE FACING MACHINES - FF1200

Performance, versatility, and safety. Delivers high-torque performance to quickly re-surface flanges and repair sealing and bearing surfaces efficiently and cost-effectively. Can be configured in either ID, OD, or surface-mount configurations for a variety of machining applications, with a quick and easy changeover. Facing diameters range from 11.8 to 60 inches (299.7 to 1524.0 mm).

MSF-640x400


MODEL MSF FLANGE FACER



The model resurfaces flanges from 1.25 inches ID to 6.19 inches OD (31.8 to 157.2 mm) quickly and accurately. Works with our BG50 BOILER GUN™ for quick and easy conversion between beveling and flange facing in the field.

Boltight tensioner - hydraulic tensioning Supplier

tension-products

standard range of hydraulic bolt tensioners


are designed for general use on top side applications. Each tool comprises of a hydraulic cylinder, bridge, puller and socket. Interchangeable adaptor kits fit common hydraulic cylinders to enable the tightening of multiple bolt sizes. Boltight solutions make it possible to tighten and loosen multiple bolts simultaneously using high-pressure hydraulics. Bolt tensioners stretch the bolt before the nut is wound down under zero friction, ensuring extreme accuracy, speed and uniformity.

bl3

SUBSEA TENSIONER


are specifically configured for Subsea applications. They feature a nickel-plated exterior that allows them to withstand high initial bolt stress. The tools are fitted with the Boltight composite material high pressure seals, which clip into place and require no adjustment.

bl4

TYPHOON TENSIONERS


range of bolt tensioners offer a high-load, low profile solution for space-restricted applications demanding high and accurate preloads, such as wind turbines. The tensioners exert a high load with both the multi-stage, ideal for radial obstruction applications and the single stage, for vertical obstruction applications.

bl5

TSR+ TENSIONERS


Fastest auto return tensioner on the market: With a focus on productivity and a reduction in downtime, the TSR+ auto return tensioner range has been designed to ensure fast, simple, safe and reliable operation.

xtra

Xtra load range


has been developed for high loads and reduced dimensions. With 30% more load than typical standard ranges and a large usable piston stroke, it provides users with versatility and fast, accurate operations.

toolset

ENGINE TOOL SETS


are available for the installation and maintenance of gas and oil diesel engines. We stock sets for various OEM engines but can also custom design sets for any diesel or gas engine. All tool sets are supplied in a box with a pump, hoses and operating manual.

nuts

HYDRAULIC NUTS


enable large diameter bolts to be tensioned with ease to high and accurate preloads. A hydraulic pump activates the internal jacking system, so the effort required to tighten a very large diameter bolt is reduced to the effort needed to operate the pump. As there is no nut rotation during tightening, the operation can be performed in a confined space and torsional stresses on thread damage are eliminated. Any number of hydraulic nuts can be connected together for simultaneous operation, ensuring all bolts in the joint can be evenly loaded to the same high and accurate preload.

cs1

CUSTOMIZED SOLUTIONS


The Nord-Lock Group is a pioneer in innovative bolting solutions and we’re always looking for new challenges to overcome. If you’re experiencing a bolting issue, you can rely on us find the most efficient and cost-effective solution.

found

Boltight’s range of foundation bolt tensioners

CUSTOMIZED SOLUTIONS


have been specifically designed for wind turbine base and foundation bolts. They meet the exacting requirements of the wind industry, while remaining reliable and easy to use. Boltight tensioners are kept in stock for the most common wind turbine applications.